SunnyPro V13H010L60 Projector lamp ELPLP60 Compatible for Epson Brightlink 425Wi Brightlink 430i Brightlink 435Wi EB-420 EB-425W EB-900 EB-905 EB-93 EB-93e EB-95

Brightlink 425Wi Brightlink 430i Brightlink 435Wi EB-420 EB-425W EB-900 EB-905 EB-93 EB-93e EB-95 EB-96W H381A H382A H383 H383A H384A H387A H387B H387C Powerlite 420 Powerlite 425W Powerlite 905 Powerlite 92 Powerlite 93 Powerlite 93+ Powerlite 95 Powerlite 96W9 steps to replace the projector lamp 1.Gather the necessary tools, screwdriver. 2.Turn off TV or Projector. 3.Remove Lamp Compartment Door. 4.Remove Lamp Assembly. Carefully pull out the lamp assembly and disconnect any power cords that may still be connected to the lamp assembly. Put it aside and don't get it confused with your new lamp! 5.Clean Lamp Compartment. Dust gets everywhere and while you have the projector open, use a soft cloth or micro-fiber cleaning cloth to remove any loose dust from the lamp compartment. 6.Insert New Lamp Assembly. Carefully reconnect any power cables to the new lamp if present and slide the new lamp into the compartment in the same orientation that the original lamp came out. 7.Replace Lamp Compartment Door. Set the lamp compartment door back into place and securely screw in the door without screwing it in too tightly. 8.Reset the lamp timer. Instructions on how to do this should be covered by the instruction manual. 9.You're Done! Enjoy your projector or TV again and make sure you have a backup lamp handy in case the lights go out unexpectedly.

• Compatible with Epson Brightlink 425Wi Brightlink 430i Brightlink 435Wi EB-420 EB-425W EB-900 EB-905 EB-93 EB-93e EB-95
• Projector Lamp with Housng
• All lamps are produced by our own factory
• All lamps are tested at our factory before leaving the facility
• Cheaper Bare Lamp without Housing Also Available for Sale